Why Your Swim Spa Cover Stinks!

Hey, no offense, but your swim spa cover smells bad. Possibly you’ve gotten used to it?
Don’t worry, it happens to all spa owners at some time or another; water is one of nature’s most erosive substances. Moisture seeps in and becomes trapped between the outer vinyl shell and the cling wrap foam cores. The warm, moist environment is perfect for mold and mildew and other types of stinky stuff.
If moisture has actually permeated even more into the cling wrap foam core, the cover ends up being waterlogged, which can rapidly grow all sorts of dark and stinky slime, but likewise make the cover really difficult to eliminate, and not as efficient at keeping the heat in the spa. Time for a better kind of swim spa cover.

Foul-smelling Swim Spa Cover?!?
• Broken or harmed. Split foam cores, ripped or used areas, torn joints. A spa cover that loses it’s arched roof line, to keep water draining pipes off correctly, will ultimately begin to puddle water, which is probably time to buy a new swim spa cover! A spa cover with threadbare spots in the vinyl is likewise bad news, and although you can stave off the unavoidable with a duct tape repair work, the water will win, eventually.
• Not Removed Regularly. Remove your spa cover weekly for 2 hours of airing out. A much better cover can hold up against longer durations, however it’s an excellent practice to eliminate the cover and let it get some air on a weekly basis. If you can quickly open the zipper to permit moisture to leave do so, but don’t get rid of vulnerable foam panels unless definitely needed.
• Poorly Made. It’s simple to make a swim spa cover with tape and staples, but it won’t stop moisture very well. Even the very best foam filled covers with vacuum-wrapped and heat bonded seam are not going to keep the intense moisture from your spa from reaching the foam core. The only genuine option is a swim spa cover utilizes air to insulate instead of foam.
• Bad Spa Water. If the spa water is not maintained routinely with sanitizer and filtering, or is not stunned frequently enough, germs and algae can make the most of a congenial environment to flourish. Low pH, high chlorine or high ozone levels can likewise weaken the underside of your spa cover. Because the cover is so near to the spa, it soaks up the chemistry of the spa. Tidy, clear and sanitary water is the very best environment to prevent foul-smelling spa covers. (Sorry however this is just BS) The reality is the areas in the foam are almost laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outdoor spa covers, unless your back deck is covered or your spa is in a gazebo, you have sun, rain, pollen, dust, contamination, and animals to contend with. If you have a partial roofing, that can be even worse than no roofing system at all, if an overhanging eave drains water onto the spa cover. Tidy and condition a spa cover 2-4 times annually, so that it always looks fantastic, and is secured from the components. Once again, this really isn’t really going to stop the mold and mildew from growing inside a foam cover. However it will assist your spa dealer pay their costs.

Your Choices

Fix Your Hot Tub Cover!
• Remove to Safe Location: This initial step might appear obvious, but you need a great place to enable the cover to sit undisturbed from family pets, wild animals, and winds. It must be a warm place if possible, or a dry indoor area with low humidity can likewise be utilized.
• Deodorize & Disinfect: You may not have to do both, it’s finest to be as gentle as possible. Don’t use home cleaning products on your spa cover, odd chemicals can end up in your spa water. Gently clean all exterior surfaces with spa cover cleaner, and permit the panels to dry.
• Remove the Panels: Again, this ought to be prevented if possible, because the panels might end up being damaged throughout elimination or cleansing. However if you figure out that there is something slimy inside, you can usually unzip and remove the panel for a cleansing inside and out.

How often does your spa dealership expect you to do all this? If your swim spa is secured from the majority of sun and rain, twice each year. If it’s out in the open it should be 3-4 times each year. Let that sink in a minute.

Much better Choice
The most convenient remedy for a smelly swim spa cover is to simply buy a various sort of swim spa cover A foul-smelling swim spa cover merely implies that your cover is taking on wetness, and things are beginning to grow! Swim Spa Covers from SpaCap.com that doesn’t use foam however has sealed air chambers instead will avoid giving the mold and mildew a location to grow in the first place.

Leave a Reply

Your email address will not be published. Required fields are marked *