Hey, no offense, however your Swim Spa Cover smells bad. Possibly you’ve gotten used to it?
Don’t worry, it occurs to all spa owners at one time or another; water is among nature’s most erosive compounds. Moisture leaks in and ends up being trapped in between the outer vinyl shell and the cling wrap foam cores. The warm, damp environment is perfect for mold and mildew and other kinds of stinky stuff.
If wetness has actually permeated even more into the cling wrap foam core, the cover ends up being waterlogged, which can quickly grow all sorts of dark and foul-smelling slime, but likewise make the cover truly hard to eliminate, and not as reliable at keeping the heat in the spa. Time for a much better kind of Swim Spa Cover
Smelly Swim Spa Cover?!?
• Broken or damaged. Split foam cores, ripped or used spots, torn seams. A Swim Spa Cover that loses it’s arched roofing line, to keep water draining pipes off properly, will ultimately begin to puddle water, which is most likely time to purchase a new Swim Spa Cover! A Swim Spa Cover with threadbare areas in the vinyl is also problem, and although you can ward off the inescapable with a duct tape repair, the water will win, ultimately.
• Not Removed Regularly. Eliminate your Swim Spa Cover weekly for 2 hours of airing out. A better Swim Spa Cover can endure longer durations, however it’s a great habit to remove the cover and let it get some air on a weekly basis. If you can easily open the zipper to allow wetness to get away do so, but don’t remove delicate foam panels unless absolutely needed.
Actually, this is just hogwash The problem is the foam itself. It would be great if it were put into use in a totally dry setting. Unfortunately, swim spas by their very nature are filled with warm water. Warm water creates steam and steam rises up and gets into the cracks and crevises in the foam until it gets so heavy you can’t lift it anymore. The only way to avoid it is to never put it on the swim spa.
• Poorly Made. It’s simple to make a Swim Spa Cover with tape and staples, but it will not stop moisture effectively. Even the best foam filled Lightweight Swim Spa Covers with vacuum-wrapped and heat bonded seam are not going to keep the extreme moisture from your spa from reaching the foam core. The only genuine service is a Swim Spa Cover uses air to insulate instead of foam.
• Bad Spa Water. If the spa water is not kept routinely with sanitizer and filtering, or is not stunned frequently enough, bacteria and algae can benefit from a congenial environment to flourish. Low pH, high chlorine or high ozone levels can likewise weaken the underside of your Swim Spa Cover cover. Due to the fact that the cover is so near the spa, it absorbs the chemistry of the spa. Tidy, clear and sanitary water is the best environment to prevent foul-smelling spa covers. (Sorry but this is just BS) The fact is the spaces in the foam are almost laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outside Lightweight Swim Spa Covers, unless your back deck is covered or your spa is in a gazebo, you have sun, rain, pollen, dust, pollution, and animals to contend with. If you have a partial roof, that can be even worse than no roofing system at all, if an overhanging eave drains water onto the Swim Spa Cover Clean and condition a spa cover 2-4 times per year, so that it always looks fantastic, and is protected from the components. Once again, this truly isn’t going to stop the mold and mildew from growing inside a foam cover However it will assist your spa dealer pay their expenses. If this were actually true a Swim Spa Cover inside would never get smelly and that just isn’t true.
Repair Your Swim Spa Cover!
• Remove to Safe Location: This initial step might seem apparent, but you require an excellent location to permit the cover to sit undisturbed from family pets, wild animals, and winds. It should be a bright location if possible, or a dry indoor location with low humidity can likewise be used.
• Deodorize & Disinfect: You may not need to do both, it’s finest to be as gentle as possible. Do not use home cleaning products on your Swim Spa Cover, weird chemicals can wind up in your spa water. Carefully clean all outside surfaces with spa cover cleaner, and permit the panels to dry.
• Remove the Panels: Again, this need to be avoided if possible, due to the fact that the panels might become damaged during removal or cleaning. But if you identify that there is something slimy within, you can usually unzip and eliminate the panel for a cleansing inside and out.
How frequently does your spa dealership anticipate you to do all this? If your swim spa is secured from most sun and rain, two times per year. If it’s out in the open it should be 3-4 times each year. Let that sink in a minute. Getting the foam panels in and out of the cover (something that was never designed to be done after it was initially constructed) will just cause it to rip apart or breakdown even faster.
Much better Choice
The simplest treatment for a foul-smelling Swim Spa Cover is to simply buy a different type of Swim Spa Cover A smelly swim spa cover merely means that your cover is handling wetness, and things are beginning to grow! Lightweight Swim Spa Covers from SpaCap.com that doesn’t use foam however has actually sealed air chambers rather will prevent offering the mold and mildew a place to grow in the first place.